Agriculture Equipments


Simple Motor Thresher
Power Drum Size (inches) Output (Quintal/hr)
2 HP 12 X 22 1-1.5 (approx)
3 HP 14 X 24 2-2.5 (approx)
5 HP 14 X 28 2.5-3 (approx)
7.5 HP 16 X 28 3-3.5 (approx)
10 HP 18 X 28 4-4.5 (approx)
  • Operated on Electric Motor / Diesel Engine.
  • All models available with DW / DF also
  • All models available in Self Feed System

Note : All the mentioned outputs for the normal crop.

Request a Quote
Tractor Model Thresher
Power Drum Size (inches) Output (Quintal/hr)
10 HP 18 X 33 6-7 (approx)
12.5 HP 20 X 33 7.5-8 (approx)
15 HP 24 X 33 8-9 (approx)
20 HP 27 X 33 9-10 (approx)
25 HP 30 X 33 10-12 (approx)
30 HP 33 X 33 12-15 (approx)
35 HP 36 X 33 15-18 (approx)
  • Operated by Tractor.
  • All models are available with DW / DF

Note : All the mentioned outputs for the normal crop.

Request a Quote
Hopper Model Thresher
Power Drum Size (inches) Output (Quintal/hr)
10 HP 18 X 33 7-8 (approx)
12.5 HP 20 X 33 8.5-9 (approx)
15 HP 24 X 33 9-10 (approx)
20 HP 27 X 33 11-12 (approx)
25 HP 30 X 33 12-13.5 (approx)
30 HP 33 X 33 13.5-15 (approx)
35 HP 36 X 33 15-17 (approx)
  • Operated by Tractor.
  • All models are available with DW / DF

Note : All the mentioned outputs for the normal crop.

Request a Quote
Cultivator
Specifications 9 - Tynes 11 - Tynes
Frame 75 X 40 mm (Channel) 75 X 40 mm (Channel)
Springs 10 mm WD 50 mm OD 28.5 Coils 10 mm WD 50 mm OD 28.5 Coils
Tynes 50 X 25 mm (Forged) 50 X 25 mm (Forged)
Pairs 65 X 65 X 6 mm Angle Main Steel 65 X 65 X 6 mm Angle Main Steel
Anchor Pins 22 mm 22 mm
Nuts High Tensile High Tensile
Frame Bolt M 12 X 35 (High Tensile) M 12 X 35 (High Tensile)
Tyne Bolt M 18 X 65 mm(High Tensile) M 18 X 65 mm(High Tensile)
3 Point Linkage 50 X 60 mm (Rear & Front) 50 X 60 mm (Rear & Front)
Shovel 8 mm EN-45 8 mm EN-45
Length 2000 mm 2457 mm
Width 850 mm 850 mm
Height 585 mm 585 mm
Tiller Pin 28 mm 28 mm
Weight 280 KG 340 KG
M.B. Plough
Specifications 2 - Furrow 3 - Furrow
Frame 65 X 65 X 8 mm Box & 50 mm Round 65 X 65 X 8 mm Box & 50 mm Round
Tynes 36 mm Profile Cut Single Piece 36 mm Profile Cut Single Piece
Pairs 65 X 65 X 6 mm Angle Main Steel 65 X 65 X 6 mm Angle Main Steel
Length 1300 mm 1880 mm
Width 738 mm 738 mm
Height 1066 mm 1066 mm
Blade 10 mm 10 mm
Mould Board 8 mm 8 mm
Shovel 40 X 25 mm Bar (EN.42 Forged) 40 X 25 mm Bar (EN.42 Forged)
3 Point Linkage 65 X 16 mm Flat & 31 mm Square 65 X 16 mm Flat & 31 mm Square
Clamp 125 X 50 mm 125 X 50 mm
Width Of Cut 610 mm (max) 910 mm (max)
Depth Of Cut 350 mm (max) 350 mm (max)
Weight 235 KG (approx) 350 KG (approx)
Power Required 30 - 40 55 - 60
Wheel/Disk Harrow
Specifications 6 X 6 7 X 7
Frame 75X10 mm Main Angle 75X10 mm Main Angle
Pipe 'C' class Heavy Duty (with central Bar of 9" on each Side) 'C' class Heavy Duty (with central Bar of 9" on each Side)
Spool Cast Iron 8 Kgs Each. Cast Iron 8 Kgs Each.
Disc 24 '' 24 ''
No Of Discs 12 12
Type of Discs Plain Plain
Joining Plate 20 mm 20 mm
Weight 500 KG (approx) 580 KG (approx)
Land Leveller
Specifications 6 - Feet 7 - Feet 8 - Feet
Frame Draw Bar mounting with the help ofMS Flat section 75 x 20mm, 520mm Long
Side Support Vertical : 25 x 10mmMS Flat
Horizontal : Crescent shape, MS Flat, Max. width 100mm, Min. width 35mm
Thickness of Plate 10 mm
Blade DIM. 70 x 10mm (High carbon steel)
3 Point Linkage 65x16 mm Flat
Central Support MS Angle 40 x 5 mm
Linkage Pin 28 mm
Span 1850 mm 2160 mm 2450 mm
Weight 140 KG (approx) 155 KG (approx) 170 KG (approx)
Product Name
Your Name
Contact No.
Email
Any Message